In this article we’ll look at five ways to clean track. If you want to get a lively debate started amongst model railroaders, ask them the best way to clean track. Some prefer abrasive blocks, like the Bright Boy, while others turn to any number of cleaning solvents, homemade or commercial cleaning cars, or off-the-shelf […]
Handy tools for DCC wiring projects: I talked about soldering irons, solder, heat sinks, tip cleaners and other handy tools for DCC wiring in the August 2017 DCC Corner column. I’m not going to repeat that, but I want to provide an update. Some soldering irons can leak current through their tips if they’re not […]
Name: Ray Wheeler Railroad Name: Jericho & Mt Zion Railway Location: Lynnwood, WA Scale: G scale Theme: Tourist railroad with freight operations in the modern era.Description: “November Plow Patrol” – Ride along on J&MtZ plow car #628 with Engine # 20 and Caboose 02 make a snow patrol run on the main track. Music from […]
Weathering N scale locomotives: Our Canadian Canyon N scale layout just wasn’t complete without locomotives and rolling stock to bring it to life. Running through rugged mountain terrain, the bright red Canadian Pacific road units quickly accumulate a layer of grime. Road dust on the trucks, fuel tank, side frames, and pilots; soot around the exhaust […]
Five tips for blending backgrounds: While scenery at the outside edge of a layout may pose some difficulties (see my story “Scenery on the edge” in Model Railroad Planning 2017), the back of the layout also has its challenges. The abrupt change in the model scene from horizontal to vertical at the backdrop demands we do […]
Five tips for trouble-free turnouts: Since turnouts play a prominent role on model railroads, they deserve attention before and after installation, as well as during routine maintenance. Taking the time to ensure turnouts perform well will guarantee more reliable, and therefore more enjoyable, operation. Though all commercial turnouts meet National Model Railroad Association (NMRA) standards, […]
Model railroad track terms Whether you’re new to the hobby or starting again after a break, it’s good to know the terms of the hobby. The following model railroad track terms are geared toward HO and N scales, but many of the terms also apply to other gauges. Gauge: Gauge is the distance between […]
Acrylic paints for airbrushing While there are many different areas of the model railroading hobby that we can all explore, one common theme involved in almost all of these areas is paint. Whether you are painting entire backdrops, buildings, vehicles, or even figures, paint is a product that is necessary for model railroading. If you’re […]
HO scale number 6 turnouts HO scale number 6 turnouts. Running trains in a circle or oval may hold your attention for a little bit, but eventually you’ll want your trains to go somewhere beyond that basic loop. That’s where turnouts enter the scene. Turnouts let you split one line into two, design yards, model […]
LocoFi 3 Wi-Fi module: The third generation of LocoFi’s Wi-Fi module has recently released, bringing with it multiple improvements on previous versions of this Digital Command Control-alternative technology. As opposed to DCC, where packets of information are sent through the rails to each decoder, LocoFi, manufactured by WiFi Model Railroad, uses Wi-Fi signals to send […]
Name: Ray Wheeler Railroad Name: Jericho & Mt Zion Railway Location: Lynnwood, WA Scale: large scale Theme: Tourist railroad with freight operations in the modern era. Description: “Rollin’ By on the Hill” – J&MtZ trains rolling by on the 3% grade at Laurel Jct. Music from YouTube Sound, “Everything Where It Needs To Be” by […]
Parts of an Electro-Motive Division GP15-1 diesel locomotive Electro-Motive Division (EMD) produced the GP15-1 diesel locomotive from June 1976 through March 1982. During that time, 310 units were built. The four-axle road switcher was equipped with a 1,500hp 12-645E diesel engine, a D32 generator, and D77B traction motors. Original owners included Chicago & North Western […]
