How to clean a dirty diesel locomotive

hands with toothbrush cleaning plastic model with water and soap

How to clean a dirty diesel locomotive Q: I just bought a 35-year-old Athearn HO SD45 painted as Electro-Motive Division’s demonstrator No. 4353. The old model has picked up a lot of dirt over the years, and I’m not sure how to go about cleaning it without damaging the paint job. Also, were the prototype […]

Read More…

How to simulate hot slab loads

three colors of model slab loads

Steel slab loads have been the subject of many reader questions, including some looking for ways to simulate hot-steel loads. While it’s easy enough to cut and paint pieces of plastic to represent the cold slabs, the trick has always been simulating the hot metal. The folks at State Tool & Die Co.have made this […]

Read More…

How to re-stencil reporting marks

hopper car with re-stenciled reporting marks

How to re-stencil reporting marks: If you’ve waited at a grade crossing recently, you’ve probably noticed many freight cars with their original reporting marks painted out and new ones applied. This is done because the car’s ownership has changed. Since repainting an entire freight car is costly, patching over old reporting marks is an accepted […]

Read More…

Regulators add three days to CP-KCS hearing

Surface Transportation Board logo

WASHINGTON – The three-day Surface Transportation Board hearing on the proposed Canadian Pacific-Kansas City Southern merger has ballooned to a six-day hearing. Testimony and questioning are taking longer than anticipated, STB Chairman Martin J. Oberman said at the start of the session this morning (Friday, Sept. 30) , which had been scheduled to be the […]

Read More…

What’s the one thing Amtrak and freight railroads have in common?

Railroads have what you could call a one-train problem. That is to say they offer but one daily departure from Point A to Point B. A case in point is Amtrak’s Pennsylvanian, which links New York City and Pittsburgh. Earlier this month I wanted to ride Amtrak to a rail shippers conference in the Steel […]

Read More…

Canadian National warns regulators that CP-KCS merger could hurt service and competition

Train with two locomotives at rural grade crossing

WASHINGTON — Canadian National, which lost the battle for Kansas City Southern to rival Canadian Pacific last year, tried to plant seeds of doubt about the CP-KCS merger in lengthy testimony before federal regulators on Thursday. CN was critical of the operating plan CP and KCS prepared, telling the Surface Transportation Board that it was […]

Read More…

Two interesting flatcar and gondola loads

model flatcar with yellow load

Two interesting freelanced HO flatcar and gondola loads can be made out of plastic parts from used Bic disposable razors. The flatcar load is made from the blade covers while the gondola carries cut-down handles. Of course, you need to be careful with the spent razor blades and dispose of the remnants properly to avoid […]

Read More…

Duncan to lead Norfolk Southern’s combined Transportation, Network Operations organization

Head shot of smiling man in coat and tie

ATLANTA — Norfolk Southern is revising its managerial structure, creating a combined Transportation and Network Operations organization to be led by Paul B. Duncan. Duncan, who is being promoted to senior vice president, transportation and network operations, will lead a team responsible for designing network operations, executing network plans, and coordinating train movements, the railroad […]

Read More…

FRA study sees issues with locomotive cab automation

Image of computer screen

WASHINGTON — A Federal Railroad Administration-sponsored study on the use of locomotive cab automation systems found human errors occurred in three of 10 sessions in a locomotive simulator, and recommends further training on the systems for engineers, conductors and dispatchers. The study, “Human Error Analyses Associated with Locomotive Cab Automation,” also calls for further study […]

Read More…

HDR gets design contract for UP-led portion of CREATE 80th Street project

Map showing tangle of rail junctions in south Chicago

CHICAGO — Union Pacific has selected engineering firm HDR to provide final track design and engineering work for the UP-led portion of the 80th Street Junction Replacement project, part of the CREATE program’s larger 75th Street Corridor Improvement Project. HRD will produce design for relocation of two Union Pacific mainline tracks between 80th Street and […]

Read More…

Senator introduces bill to address common-carrier rules

Trains Washington Watch logo

WASHINGTON — U.S. Sen. Tammy Baldwin (D-Wis.) introduced a bill this week seeking to better define railroads’ common-carrier rules and establishing criteria for the Surface Transportation Board to consider when assessing complaints about service issues, as well as a timeline to do so. Baldwin says in a press release that the “Reliable Rail Service Act,” introduced […]

Read More…

Canada’s government, railroads to assist Ukraine’s rail industry

Repair work underway on rail bridges

MONTREAL — The Canadian government and Canada’s railway industry will work to support reconstruction and operation of Ukraine’s rail and other transportation infrastructure, the government and the Railway Association of Canada announced Wednesday. The announcement includes formation of a working group involving the governments of both countries, the RAC — on behalf of railways including […]

Read More…