Q: I’m considering converting my N scale diesel fleet to DCC. I have a concern about getting realistic sound in N scale locomotives. On videos of model railroads I have watched, the diesel acceleration and running sound seems to feature the high-pitched whine of the diesel generators. When I railfan real diesels around the Pittsburgh […]
[…]
Q: I have a trestle bridge above a deep ravine on my HO scale layout and would like to automatically slow DCC locomotives approaching the bridge to avoid too rapid an entry. Using DCC, is there a method to provide such “auto deceleration?” — Paul Savello, Cedar City, Utah A: Hi, Paul. Such a thing […]
Q: In your “Ask MR” column “Speed matching DCC locomotives for better consisting”, you suggest to turn off the locomotives’ momentum, because momentum will interfere with accurately measuring the locomotives’ speed. My question is: How do I know if the ESU decoders that came with my locomotives are programed with momentum? I am using an […]
Q: I recently added a Faller carousel to my HO scale model railroad. It is lighted and motorized. Now I would like to add a sound module to the layout to play carousel sounds. Any suggestions where I might find one? — Larry Gaiardelli A: I couldn’t find a sound module pre-recorded with carousel sounds, […]
The following project is an update of Gary D. Patterson’s “Simplified CTC signals” in the July 1988 issue of MR. Bringing the project up to date was a large endeavour. The block control project now incorporates “all” solid-state components controlled by an Arduino microcontroller. I refer to this updated article as “CTC Signals 2.0.” The […]
Q: I’m having some N scale locomotive electrical problems. My 6 x 8-foot layout is powered by NCE Digital Command Control. My locomotives will roll a few inches, then stop. If I give them a push, they stutter on/off, on/off, on/off. When the locomotives are moving, the block occupancy detector’s light-emitting diode (LED) is on, […]
Model trains are often kept in spaces below grade, which are subject to dampness or worse, flood water! Fortunately, if your locomotives are left damaged from such flooding, it doesn’t necessarily equate to total loss. In this video, David Popp walks through the process of evaluating the damage through the steps required to get your […]
Model trains are often kept in spaces below grade, which are subject to dampness or worse, flood water! Fortunately, if your locomotives are left damaged from such flooding, it doesn’t necessarily equate to total loss. In this video, David Popp walks through the process of evaluating the damage through the steps required to get your […]
Modelers David Popp, Brian Schmidt, and Bryson Sleppy install the wiring power bus and Digital Command Control system on their modular T-TRAK N scale layout. T-TRAK is a modular N scale railroading system that uses foot-wide boxes plugged together to build tabletop layouts. In this fourth installment, the trio demonstrates how to build a portable […]
Modelers David Popp, Brian Schmidt, and Bryson Sleppy add Kato Unitrack to their modular T-TRAK N scale layout. T-TRAK is a modular N scale railroading system that uses foot-wide boxes plugged together to build tabletop layouts. In this third installment, the trio demonstrates how to build, wire, and install the Kato N scale Unitrack to […]
In this all-new series, host David Popp keeps progress on the N scale (1:160) T-Trak modular layout moving forward. Here, he shares various techniques for working within the specified electrical standards and recommended practices to bring power the rails, including the unique bridge sections of track and turnouts (track switches) too! […]
