Having trouble viewing this video? Please visit our Video FAQ page When essential framework under our Canadian Canyons N scale project layout prevented us from installing a Tortoise motor in the standard configuration, David opted for a nifty alternative solution. In this video David shows how to use a Remote Tortoise Mount to situate […]
Union Pacific road diesels lead a stack train along the Meadow Valley Wash. Dick Christianson explains how he scenicked this side of our N scale project layout. photo by Bill Zuback Fig. 1 Cutting foam. Dick’s friend Stener Harildstad used a serrated kitchen knife to cut the extruded-foam insulation board. The sloping contour of the […]
Dick Christianson explains how to wire the Salt Lake Route for Digital Command Control. He concealed the system’s command station in a drawer built beneath the layout’s intermodal yard. Bill Zuback photo Fig. 1 Power feeders. Last month Dick explained how to install Kato Unitrack power feeders during tracklaying. He used plug-in sections on the […]
A pair of Union Pacific freights bank into the superelevated curves on the N scale Salt Lake Route. Dick Christianson explains how he installed Kato Unitrack, including the firm’s new double-track sections with superelevated curves (inset), on our project layout. One of the parameters Model Railroader gave me regarding the N scale project layout was […]
Having trouble viewing this video? Please visit our Video FAQ page Trackwork continues on our N scale project railroad. In this installment of the ongoing Canadian Canyons series, David Popp shares techniques for laying down more sections of flextrack, specifically around the curves of the staging yard. […]
Having trouble viewing this video? Please visit our Video FAQ page Trackwork continues on our N scale project railroad. In this installment of the ongoing Canadian Canyons series, David Popp shares techniques for laying down more sections of flextrack, specifically around the curves of the staging yard. […]
Stener Harildstad holds one end of the N scale Salt Lake Route with the legs folded up inside the L girders. This month, learn how to build easy-to-transport benchwork with folding legs for our 4 x 9-foot project layout. A pair of Union Pacific freights meet on the Meadow Valley Wash side of the layout. […]
The rugged mountain desert scenery of the Meadow Valley Wash provides a picturesque backdrop for trains on the N scale Union Pacific Salt Lake Route. The 4 x 9-foot model railroad, built by retired managing editor Dick Christianson, features Kato Unitrack with superelevated curves. Model Railroader associate editor Cody Grivno and graphic designer Drew Halverson […]
Having trouble viewing this video? Please visit our Video FAQ page David dives into laying track in the staging yard on our N scale project railroad, but before he even opens that brand-new box of flextrack, there’s a lot of other work to do, including painting the roadbed, drilling holes for the switch motors, […]
Having trouble viewing this video? Please visit our Video FAQ page The plywood panels are now in place, and the track centerlines are all marked! In this episode of the Canadian Canyons series, it’s time for David to begin the track laying effort by first installing cork roadbed. Follow along, as he demonstrates tips […]
Having trouble viewing this video? Please visit our Video FAQ page David dives into laying track in the staging yard on our N scale project railroad, but before he even opens that brand-new box of flextrack, there’s a lot of other work to do, including painting the roadbed, drilling holes for the switch motors, […]
Here is a time-lapse video of the construction of my latest N scale micro-layout project. The layout is a bit less than 24″ in diameter and features a track radius that averages around 9″. The track is ballasted and weathered Kato Unitrack, and the overall layout construction is foam insulation board on top of a […]
