Simplifying body-mounted couplers: Former editor Neil Besougloff used to accuse me of trying to convert all N scale modelers to using body-mounted couplers. He was joking – I think – but I’m not mounting such a campaign. For 90 percent of you, using truck-mounted, body-mounted, or a mix of both would make little difference. Your […]
How to make ‘good enough’ better: The N scale shipping house shown here isn’t finished, but I want to make a point about the roof, namely the diamond-pattern shingles. They were made from laser-cut paper by GC Laser and laid one row at a time. That was a modeling decision I ordinarily wouldn’t make because […]
Dirt and N scale layouts: A locomotive model won’t run if current doesn’t pass from the rails to the pickup wheels. “Duh,” you may say, but that fact isn’t necessarily obvious, especially to younger people who haven’t tinkered with mechanical or electrical devices to the extent previous generations did. Filthy track can look clean The […]
Disassembling N scale diesel locomotives: In the 1990s, Kato pioneered its classic, vertically split-frame design. Since then, probably more than 80% of the N scale locomotives made, regardless of manufacturer, have followed (in fact, downright copied) that approach, meaning that if you’ve learned how to work on one of them, you can work on nearly […]
Trouble with TankTrain cars: Sometimes I think this column should be called “Jim’s latest screw-up.” Here’s a recent case in point. I’d just gotten my Athearn TankTrain cars and was carefully opening the boxes, taking the cars out one at a time, and checking them over. I checked the wheel gauge with a National Model […]
I thought about calling this column “What on earth were they thinking,” but that wouldn’t have made a good title because someone looking at the table of contents would have had no idea what the article was about. The “they” in my unused title was Atlas, which had the N scale whale-belly tank car shown […]
Roadbed for main lines and spurs: Lots of modelers in all scales take measures to differentiate mainline track from spurs and sidings. Spurs are dead-end tracks leading to industries, loading ramps, and sometimes stations. Sidings are tracks usually parallel to mainline tracks and are double-ended so a train can take the siding, stop, and wait […]
3D printed structures in N scale: In the heart of Tehachapi, Calif., near the Union Pacific’s double-track main line, stands a steam-era Southern Pacific 65,000-gallon water tank. It was brought to the town from another location on the railroad after a major earthquake destroyed its predecessor on April 21, 1952. Without it, Tehachapi had a […]
See what you’re really modeling: Does this ever happen to you? You’re driving down a street you’ve gone down a hundred times before and you notice a particular house for the first time. “Where the heck did that come from?” you’re wondering. My point is we can look right at things and not really see […]
Derailments of the curious kind: Several months ago, my operations chief Gordy Spiering and I were orbiting a couple trains on my N scale layout for a group of visitors and the same boxcar kept derailing at the west end switch in the town of Tehachapi. In a situation like that the show must go […]
An N scale loading ramp for Bakersfield: In 1979, Jim FitzGerald, remembered fondly by many of us N scalers as Mr. Ntrak, introduced me to the Tehachapi Loop and its environs, and my model railroading fate was sealed forever. I wrote a remembrance of Jim in the May 2014 Model Railroader for my N Scale […]
Tips for Body-mounted couplers on auto racks: When N scale got its start in Europe in the 1960s, its originators conceived it in the tradition of toy trains, with truck-mounted couplers that could negotiate sharp-radius curves. Some N-scalers began switching to body-mounts after Kadee introduced its N scale knuckle coupler in the early 1960s. (Kadee […]
