Name: Colorado & Southern Clear Creek District Layout owner: Doug Tagsold Scale: 1:72 Size: 30 x 40 feet Prototype: C&S Clear Creek District Locale: Denver west into the Rocky Mountains Period: 1920s Style: double-deck linear walkaround (roll-around) Mainline run: 450 feet plus 150-foot branch line Minimum radius: 24″ Minimum turnout: no.6 Maximum grade: 3 […]
Name: Adrian & Blissfield Macomb Division Layout owner: Ron Griffin Scale: HO (1:87.1) Size: 13′-6″ x 26′-6″ Prototype: Adrian & Blissfield RR Locale: southeastern Michigan Era: 2010 Style: multi-deck walk-in Mainline run: 240 feet Minimum radius: 24″ Minimum turnout: no. 5 Maximum grade: 2.5 percent in helix Train length: 5 feet Benchwork: brackets cantilevered from […]
Name: Pacific Coast Lines Layout owner: Steve Mahan Scale: HO (1:87.1), HOn3 (1:87.1, 3-foot gauge) Size: 42 x 57 feet Prototypes: Atchison, Topeka & Santa Fe; Southern Pacific; Union Pacific; Western Pacific; Denver & Rio Grande Western Locale: Southern California Era: 1952-1960 Style: multi-deck walk-in Mainline run: 1,600 feet Minimum radius: 36″ Minimum turnout: no. […]
Having trouble viewing this video? Please visit our Video FAQ page Our Canadian Canyons N scale layout project would certainly be flawed without adding tunnels (and slide sheds) to the Fraser and Thompson River segments. No worries! Drew and Kent show how to plot out and install one of the many foam-built tunnels they […]
Our Canadian Canyons N scale layout project would certainly be flawed without adding tunnels (and slide sheds) to the Fraser and Thompson River segments. No worries! Drew and Kent show how to plot out and install one of the many foam-built tunnels they need to make the layout scenes look credible. […]
Having trouble viewing this video? Please visit our Video FAQ page Drew and Kent keep the scenery effort moving forward. In this episode of our Canadian Canyons N scale layout project, the two share how they attached “ribs” to the spine they just installed. Once this rough cut of the scenery substructure is in […]
Drew and Kent keep the scenery effort moving forward. In this episode of our Canadian Canyons N scale layout project, the two share how they attached “ribs” to the spine they just installed. Once this rough cut of the scenery substructure is in place, you’ll begin to see how impressive the mountainside will be! […]
Having trouble viewing this video? Please visit our Video FAQ page MR’s Cody Grivno lends a hand to our Canadian Canyons N scale layout construction effort. Detailing trackwork is Cody’s forte, so in this video he’ll demonstrate the steps for painting and weathering a main line laid on concrete ties. Plus, he also shows […]
Having trouble viewing this video? Please visit our Video FAQ page And so the scenery construction phase of our Canadian Canyons N scale layout begins! With Kent Johnson and Drew Halverson leading the charge, the effort starts with a quick survey of the Fraser and Thompson Canyon terrain features, followed by the installation of […]
And so the scenery construction phase of our Canadian Canyons N scale layout begins! With Kent Johnson and Drew Halverson leading the charge, the effort starts with a quick survey of the Fraser and Thompson Canyon terrain features, followed by the installation of a dual-function foam board spine. Enjoy the video, and then download PDFs of […]
Having trouble viewing this video? Please visit our Video FAQ page MR’s Cody Grivno lends a hand to our Canadian Canyons N scale layout construction effort. Detailing trackwork is Cody’s forte, so in this video he’ll demonstrate the steps for painting and weathering a main line laid on concrete ties. Plus, he also shows […]
Having trouble viewing this video? Please visit our Video FAQ page With just a tad more trackwork required to finish off the upper level of our Canadian Canyons N scale layout, David Popp stumbles into a tricky patch where the main section connects with the detachable lobe. No worries, David shows you a bulletproof […]
