Marc Horovitz Adriane curves the rail in a bench-mounted rail bender. Marc Horovitz I confess to being something of a track fanatic. I love track. To me, the railway is the track. Track can make or break a line. No matter how beautiful or well thought out the rest of the railroad is, poor trackwork […]
This wooden column supports the control center. Leads have been neatly attached to it. Marc Horovitz Small trains give the illusion of traveling long distances in a garden railway. Marc Horovitz With our trackwork complete, we could now turn our thoughts toward wiring the Colorado & Pacific. Since ours was a small railroad, wiring would […]
Choosing the right tools will make garden railroading a much easier experience. Marc Horovitz There is no single right way to build a garden railroad. There are, however, lots of wrong ways. The first step in heading down the wrong path starts with the tools you choose to do the work. In garden railroading, as […]
In this overview of the entire FCM de STL, you can see how much action and detail is contained in a small space. Knobs on the fascia boards control turnouts, while on/off switches control power to sidings. Bill Zuback The open-air market in the town of Santa Lucia bustles with life. Bill Zuback An FCM […]
A lumberjack rolls wet timber to the ramp at the R&P Lumber Company sawmill. The “water” is made of clear resin. Marc Horovitz A bird’s-eye view of the little town of Aurora, nestled high in the Colorado Mountains. Marc Horovitz Engine No. 1 crosses the high bridge at Indian Leap, with a load of empties, […]
This RhB Ge 6/6 II locomotive is one of a batch that was built by the author and a group of other modelers. It takes its power from the overhead wires. Martin v. Meyenburg The functioning overhead catenary system provides power for all locomotives that run on the line. The entire system was scratchbuilt. Martin […]
At the turn of the century even the smallest trains left little room for indoor model railroading Back before the “dawn of time,” say around 1860, the model train hobby was in its infancy, as was the full-size railroad industry. In fact, for decades, the development of model railways closely paralleled that of full-size railways. […]
Marc Horovitz Marc Horovitz Marc Horovitz There are several ways of connecting a lead wire to the rail. Perhaps the most positive is soldering it. The wire can also be connected mechanically. Screw-on connectors are not too reliable outdoors. However, a wire can be screwed to a clamp-on rail joiner. Split Jaw Rail Clamps offers […]
I see there are locomotives in 1:24 scale for gauge-3 track. What width is gauge-3 track? How many gauges are there? Gauge 3 is 2.5″, which is the correct gauge for modeling standard-gauge trains in G scale (1:22.5). 1:24 scale is close. There are three gauges commonly used in garden railroading: Gauge 0 (11/4″ or […]
Marc Horovitz Marc Horovitz Marc Horovitz There are several ways of connecting a lead wire to the rail. Perhaps the most positive is soldering it. The wire can also be connected mechanically. Screw-on connectors are not too reliable outdoors. However, a wire can be screwed to a clamp-on rail joiner. Split Jaw Rail Clamps offers […]
Marc Horovitz Marc Horovitz Marc Horovitz There are several ways of connecting a lead wire to the rail. Perhaps the most positive is soldering it. The wire can also be connected mechanically. Screw-on connectors are not too reliable outdoors. However, a wire can be screwed to a clamp-on rail joiner. Split Jaw Rail Clamps offers […]
At the turn of the century even the smallest trains left little room for indoor model railroading Back before the “dawn of time,” say around 1860, the model train hobby was in its infancy, as was the full-size railroad industry. In fact, for decades, the development of model railways closely paralleled that of full-size railways. […]
