Sidewinders, squeezers, and crushers: In Milwaukee, our winter days can be very cold and dry, our summer days hot and humid. We can control the climate indoors, or at least try to, with heating, air conditioning, humidifying, dehumidifying, and such, but still we sometimes run into problems with track kinking on our model railroads. The […]
Test twice, solder once: It’s one of the best lessons I’ve learned in building layouts. In fact, it’s such a good lesson that I relearn it every once in while. My problem is patience. Testing takes a little time and slows my progress, or so I sometimes start to think. Actually, it can (and I […]
Another layer of planning: Perfect model railroaders (of which I suspect there might be three in the entire world) strike a delicate balance between efforts spent planning their layouts and time devoted to building them. Most of us, though, are somewhere on the plan/build continuum. Myself, I’m pretty far over on the “let’s start sawing […]
Adventures in code 55 track: I’m now building my fourth layout featuring the Tehachapi Loop, so I call it Tehachapi IV. I’d used Peco code 55 track on Tehachapi III, and liked it very much, so I was planning to use it again. Then I saw Atlas’s new code 55 flextrack and was smitten. The […]
Helixology for N scalers: Never say never. I thought I’d never build a layout with a helix because of a number of well-known disadvantages: Helixes take up a lot of space, so unless you’ve got a large area in which to build, you aren’t gaining much layout. If you have enough space available for a […]
The American Freedom Train steam locomotives were stars in their own right during the U.S. Bicentennial tour. From 1975 to 1976, a total of three each took turns leading the 26-car exhibit train full of American artifacts through 48 contiguous states. What were these patriotic steam stars and where are they now? Southern Pacific No. […]
A (sort of) successful move: Back in 1995, I wrote a story for the first issue of Model Railroad Planning about Tehachapi III, the N scale Southern Pacific and Santa Fe layout I was building. In that story I told how I built the layout in 13 bolted-together sections supported by easy-to-disassemble L-girder benchwork. The […]
Improve ready-to-run freight cars: A few weeks ago I bought an N scale freight car at my local hobby shop. The car was a bright yellow Milwaukee Road covered hopper by Trainworx, and besides the marvelous detail, it had two other features I’ve come to look for on cars: metal wheels and body-mounted Magne-Matic couplers. […]
A signature N scale truck for Tehachapi: This photo of a cattle truck at Caliente, Calif., existed in my mind for perhaps 10 years before it finally came to fruition, and it was spurred by buying a Road Apples N scale stock trailer kit. The kit had two things going for it. First, I thought […]
N scale by the numbers: Scale model railroading couldn’t exist without numbers, some that are very important and some that are not important at all, but fun to play around with. This article is for those who model in N scale, so let’s look at N scale numbers, starting with the two most critical, 9mm […]
Improving N scale engine performance: One of the most puzzling N scale locomotive performance problems I’ve encountered came with the two Atlas Electro-Motive Division (EMD) SD60s I purchased in 2014. The prototype locomotives were lease units from Oakway (an EMD subsidiary), and they were painted in the gorgeous blue-and-white scheme EMD had used for years […]
Monon Railroad history is tied to Indiana state history. Imagine a meandering Midwestern railway constructed through difficult, sparsely settled territory and soon bankrupt as a result, discovering upon completion that it had been built between the wrong cities. It would attempt to rectify early mistakes through expensive acquisitions of adjoining railroads, and trackage rights […]
