The steel truss bridge spans a deep gully. It was assembled entirely with screws and nuts on a purpose-built table. Marc Horovitz The railway at a glance Name: Snake River Railroad Size of railroad: 200′ x 300′ (approximately) Scale: 1:29 Gauge: Nº 1 (45mm) Theme: Mainline railroading in the Northwest Era: Modern Age: 15 years […]
Download the PDF of this project here. Note: This PDF is formatted to print on your home printer. Most pieces are formatted to fit on a 8.5″ x 11″ piece of paper. For larger parts of the plan, you will see “break lines.” Line up the break lines to create the larger piece. Despite our […]
Jeff Young Full-size steam locomotives have been in existence for over 200 years, and live-steam models for nearly that long. On that basis, it might be easy to conclude that the hobby of small-scale live steam is one that would not see a lot of new technology. To the contrary, there have been a number […]
Download a PDF to build part one of our 1:20.3-scale lobster boat. Part one includes plans for the boat itself. Note: This PDF is tiled to print on your home printer. Two “overview” pages will print first, followed by the full-size plans. Each page has 1 1/2″ of intentional overlap. Trim the excess paper from […]
PDF: Build a 1:20.3 scale drovers’ caboose Download the PDF of this project here. Note: This PDF is tiled to print on your home printer. Two “overview” pages will print first, followed by the full-size plans. Each page has 1 1/2″ of intentional overlap. Trim the excess paper from each page and assemble the sections […]
Download the PDF of this project here. Note: This PDF is tiled to print on your home printer. Two “overview” pages will print first, followed by the full-size plans. Each page has 1 1/2″ of intentional overlap. Trim the excess paper from each page and assemble the sections using the overview pages as a guide. […]
Download the PDF of this project here. Note: This PDF is tiled to print on your home printer. Two “overview” pages will print first, followed by the full-size plans. Each page has 1 1/2″ of intentional overlap. Trim the excess paper from each page and assemble the sections using the overview pages as a guide. […]
Download a PDF to build part two of our 1:20.3-scale lobster boat. Part two includes finishing and detailing the boat. Note: This PDF is tiled to print on your home printer. Two “overview” pages will print first, followed by the full-size plans. Each page has 1 1/2″ of intentional overlap. Trim the excess paper from […]
Download these free plans for a work caboose! They accompany our “Garden railway basics” articles from the June and August 2006 issues. Follow along with author Kevin Strong to build a work caboose from styrene. […]
Jack Verducci shows you how to make durable, outdoor rock formations from a mixture he calls “gulapata.” Download the 1997 article free here. […]
Download this free trackplan that accompanies our Tuscarora project railroad series. In the June 2006 issue: Determining a trackplan, surveying the land, and defining objectives In the August 2006 issue: Breaking ground and building a stone retaining wall In the October 2006 issue: Building a PVC-based trackbed In the December 2006 issue: Laying track In […]
A Roundhouse “Fowler,” fitted with a coal-fired boiler by John Shawe, at work on the author’s garden railway near Toronto. Jeff Young photo When we acquire a small-scale live steamer, it is usually to run on an established garden railway. The selection of your live-steam locomotive was probably influenced by the physical characteristics of the […]
