Managing editor David Popp continues to work on the cork roadbed for the layout. He uses a surform tool to make a smooth transition from the mainline roadbed to the industrial section of the layout. Model Railroader editor Neil Besougloff describes his plan for adding a fence and streetlights to the train station scene at […]
David has finished laying all the track for Bay Junction and will show you how to install feeder wires. In the workshop you’ll see how associate editor Cody Grivno is progressing on the United Cooperative grain elevator, while senior editor Dana Kawala gets started on the fertilizer plant. […]
The Model Railroader staff is working on the Bay Junction project layout. Managing editor David Popp runs track through the backdrop for the Kelly Appliance factory while associate editor Steve Otte is building shallow interior shadow boxes for the town. […]
The Model Railroader staff continues to work on the Bay Junction HO scale project model train layout. Managing editor David Popp fastens down new plywood for the base of the new town coming in, senior editor Jim Hediger is completing the finishing touches of the moveable step, and editor Neil Besougloff is painting the roof […]
Work continues on the Model Railroader Bay Junction project. Senior editor Jim Hediger made a mockup of the appliance factory as managing editor David Popp gets ready to lower the benchwork under the industries. Executive editor Andy Sperandeo installed the culvert, and editor Neil Besougloff adds the finishing touches to the Williams Bay depot. […]
Model Railroader editor Neil Besougloff builds a stable base for the Williams Bay depot on the Bay Junction HO scale model train layout. The depot is kitbashed from Walthers and Atlas parts. Neil will also use a piece of Woodland Scenics roadbed to simulate the depot’s asphalt parking lot. Associate editor Steve Otte shows you […]
The Model Railroader staff starts work on the Bay Junction HO scale project model train layout. Managing editor David has removed some of the old scenery and fascia. Editor Neil Besougloff and associate editor Cody Grivno keep busy in the workshop with structure projects. […]
The old track has been removed and the new fascia is up on the Bay Junction HO scale project model train layout. Senior editor Jim Hediger shows how he’s making a moveable step so the Model Railroader staff can easily work on the back of the layout and editor Neil Besougloff shows his kitbashing progress […]
These stairs look complex but are surprisingly easy to construct using the author’s method. They add lots of character to structures. Add stairs to your structures with this step-by-step guide by Larry Elsenheimer! […]
Lots of work is taking place on the Model Railroader staff’s Bay Junction model train layout. Associate editor Cody Grivno has installed his United Cooperative grain elevator, while senior editor Dana Kawala describes building the fertilizer plant that will be located in front of the scene. Managing editor David Popp will also show how the […]
A great prototype photo can often be a wonderful source of inspiration for a model. This was the case for my Duluth, South Shore & Atlantic 50-foot double-door boxcar. When I saw the black-and-white inset photo of a well-worn DSS&A boxcar, I immediately decided to paint the car’s discolorations and markings on an HO model. […]
Trackwork at the Hoot Valley complex shows #8 limestone gravel roadbed underlying the #9 limestone ballast. The near track is the mainline and the other is the lumber-yard and engine-service siding. (The mainline runs through the train-storage shed in the background.) Don Parker Now it’s time to get that track onto prepared roadbed […]
