David Popp’s O scale laser-cut wood turntable kit is now completely assembled! The project build concludes as he shows how to add appropriate earth, grass, and ballast scenery to the pit, before securing small detail parts (e.g., nut-bolt-washer castings). […]
The bridge assembly is well underway, so David can now focus on building and installing the wheels that put his O scale laser-cut wood turntable kit into motion. If that’s not enough, he even gets the rails placed on bridge deck and takes a locomotive for a spin! […]
After installing the motor mechanism, David adds an automated polarity control to his O scale laser-cut wood turntable kit. And then, it’s on to separating, sorting, and building the bridge assembly. […]
David has now arrived at the stage where it’s time to install the drive mechanism into his assembled O scale laser-cut wood turntable kit. Follow along as he shares his process for fitting the 3-volt can motor and reduction gear used to put the structure into motion. […]
With the pit base of the O scale laser-cut wood turntable kit now assembled, David jumps to the task of installing the ring rail and outer wall. […]
Raymond Parent shows how to build a transport case for large scale locomotives that doubles as a delivery ramp to a layout. Check out this video to see how the ramp works. Also take a look at the article in the Fall 2020 issue of Garden Railways. […]
Narrow gauge (On30) modeler David Popp steps aspiring structure builders through the process of assembling a laser-cut wood turntable kit. From assessing the components to adding fine details, David shares how easy it is to build and finish an essential structure for his rustic, Olympia & Sand Creek railroad. This how-to, modeling mini-series starts with […]
Having trouble viewing this video? Please visit our Video FAQ page Want the freedom to paint and weather your models safely and easily in your basement? MRVP’s David Popp shows how to make that possible by installing a fold-up spray booth from Micro-Mark. Follow along as he talks you through the entire process — […]
Details are what make any scene on a model railroad come alive! In the final installment of this mini-series, Gerry Leone works to add those to his streets, sidewalks, and storefronts of Eagle Lake. Watch to see how Gerry arranges components on the workbench, before they all come together on the layout. […]
Noted narrow gauge modeler Gregg Condon shares his easy approach to building model railroad scenery without using plaster. In this how-to video, Gregg demonstrates just how simple it is to combine carved foamboard, cloth shapes, and adhesive caulk to make realistic model railroad landforms. […]
Noted narrow gauge modeler Gregg Condon shares his easy approach to building model railroad scenery without using plaster. In this how-to video, Gregg demonstrates just how simple it is to combine carved foamboard, cloth shapes, and adhesive caulk to make realistic model railroad landforms. […]
Having trouble viewing this video? Please visit our Video FAQ page Gerry Leone is back on the streets again. In this episode, he shares how to scribe cracks into concrete roads; apply a realistic, aged concrete color; include brick pavement; and add a dirt alley between buildings. […]
