After installing the motor mechanism, David adds an automated polarity control to his O scale laser-cut wood turntable kit. And then, it’s on to separating, sorting, and building the bridge assembly. […]
David has now arrived at the stage where it’s time to install the drive mechanism into his assembled O scale laser-cut wood turntable kit. Follow along as he shares his process for fitting the 3-volt can motor and reduction gear used to put the structure into motion. […]
With the pit base of the O scale laser-cut wood turntable kit now assembled, David jumps to the task of installing the ring rail and outer wall. […]
Narrow gauge (On30) modeler David Popp steps aspiring structure builders through the process of assembling a laser-cut wood turntable kit. From assessing the components to adding fine details, David shares how easy it is to build and finish an essential structure for his rustic, Olympia & Sand Creek railroad. This how-to, modeling mini-series starts with […]
Whether installing a decoder or working on the layout, a sharp wire cutter and striper can make any electronics project go faster and easier. Learn how as senior editor Dana Kawala demonstrates the Xuron Universal Wire Cutter. […]
Having trouble viewing this video? Please visit our Video FAQ page Take your model structure building to the next level with a scribing tool. Watch as Group Technical Editor Cody Grivno shows you how to use a scribing tool, such as this one from the Kalmbach Hobby Store, to blend the mortar lines of […]
Having trouble viewing this video? Please visit our Video FAQ page It can be difficult to get decals to conform to an irregular surface, such as when placing a sign decal on a brick textured wall of a plastic stucture kit. Associate editor Steve Otte shows you how to tackle this task by using […]
Having trouble viewing this video? Please visit our Video FAQ page Do you sometimes feel like you need an extra hand when assembling a structure kit? Watch Group Technical Editor Cody Grivno as he demonstrates how to use this magnetic snap and glue set from the Kalmbach Hobby Store. It’s designed to hold wall […]
Having trouble viewing this video? Please visit our Video FAQ page Renee Grosser reveals more of her expert scratchbuilding insights. In this episode, she shares how easy it is to add siding to her O scale structures when using clapboard-pattern, sheet styrene material. […]
Having trouble viewing this video? Please visit our Video FAQ page Gerry Leone demonstrates a handy technique that makes it appear like your photos are captured under real sunlight. Plus, he’ll also show how photo enhancement software can bring new clarity to your photography efforts! […]
Having trouble viewing this video? Please visit our Video FAQ page A Xuron Modeler’s tool kit includes sprue cutters, microshears, and tweezernose pliers. All of these tools get a lot of use down at the Model Railroader workshop. In this quick demo, editor Hal Miller shows you some of his favorite tips for using […]
Having trouble viewing this video? Please visit our Video FAQ page For projects such as building a model structure roof, gluing pieces of styrene at an angle can be tricky. Associate editor Steve Otte shows you how to make this task much easier and quicker with a set of snap-and-glue clamps. […]
