An Electro-Motive Division GP38-2 has been added to the Master Line from Atlas Model Railroad Co. The N scale model, based on a Phase II prototype, uses former Walthers (and before that Life-Like) tooling that Atlas acquired back in 2018. Prototype history Electro-Motive Division produced the GP38-2 from January 1972 until July 1986. More than […]
In this product review video, Model Railroader Senior Editor Cody Grivno examines the Athearn HO scale Electro-Motive Division SD40-2. Cody begins with the prototype history, noting that EMD produced more than 3,900 units between January 1972 and February 1986. These six-axle units were rated at 3,000 horsepower and featured a 16-cylinder 645E3C diesel engine. The […]
In this product review video, Model Railroader Senior Editor Cody Grivno examines the Athearn HO scale Electro-Motive Division SD40-2. Cody begins with the prototype history, noting that EMD produced more than 3,900 units between January 1972 and February 1986. These six-axle units were rated at 3,000 horsepower and featured a 16-cylinder 645E3C diesel engine. The […]
A scale test car was recently released by Wm. K. Walthers Inc. The HO scale model, part of the manufacturer’s Proto range, features die-cast metal construction, prototype-specific details, and Proto-Max metal couplers. Prototype history Scale test cars are used in the calibration of track scales found at on-line customers. The WalthersProto model follows the lines […]
ScaleTrains HO EMD SD9 Scale: HO (1:87.1) Price: Direct-current model with 21-pin connector, $214.99; with ESU LokSound V5 sound decoder, two cube-type speakers, and an ESU-designed “PowerPack” with two super capacitors, $324.99. Manufacturer: ScaleTrains, 4901 Old Tasso Road NE, Cleveland, TN 37312; 844-987-2467; scaletrains.com ScaleTrains HO EMD SD9 features: All-wheel drive and electrical pickup Detailed […]
WalthersProto HO scale test car Scale: HO (1:87.1) Price: $49.98 Manufacturer: Wm. K. Walthers Inc., 5601 W. Florist Ave., Milwaukee, WI 53218; 414-527-0770; walthers.com WalthersProto HO scale test car features: 33” metal wheels Covered or exposed wheel bearings Die-cast metal body Factory-installed wire grab irons Multiple photo-etched brass placards as appropriate Road-name-specific reporting marks, stencils, […]
John G. Kneiling, by profession a consulting engineer, wrote Trains Magazine’s Professional Iconoclast column for many years. His column called out perceived problems with the rail industry and suggested new ways of thinking about solutions. Fifty years ago, in the September 1975 issue, Kneiling took aim at the government-supported Conrail, then newly created from several […]
