Once we had the L-girders built, it was time to turn our attention to adding the legs and support bracing for the layout. We constructed the legs as simple subassemblies with their own cross bracing. It all bolts to the L-girder frames using ¼” carriage bolts, wing nuts, and washers. We used more dimensional lumber […]
Track selection is among the first decisions you’ll have to make when you get started in model railroading, second only to scale. In HO (1:87.1), the two most commonly used track sizes are code 100 and code 83. “Code” refers to the height of the rail, measured in thousandths of an inch. For a lot […]
From tabletop, to shelf, to open grid, there are a lot of different methods you can use to build model railroad benchwork. For our HO scale East Troy Industrial Park project layout, we used a combination of two methods, cookie cutter and L-girder, to make solid, stable benchwork. While not exactly framing for a layout, […]
Once you’ve decided you’re going to build a model railroad, it won’t take you long to realize there are a few tools you’ll need to get the job done. Some of the more common hand tools may already be knocking around your workshop. However, unless you do a lot of woodworking projects, you likely don’t […]
If you’re a fan of both boats and trains, building a model railroad involving both can be a rewarding experience. A rail-marine layout allows you to practice and utilize a variety of techniques and skills, including making water and building unconventional vehicles like car floats and cranes. They also don’t have to take up a […]
Did you just get a new train set for Christmas? Are you growing bored watching it go around and around the same oval? Don’t worry, your introduction into the world of model railroading is just beginning. Luckily for you, most train set manufacturers offer track expansion sets to help expand your starter train set. […]
When it come to track plans, everyone has a favorite. After all, each modeler values and prioritizes different aspects of model railroading. Some prefer intricate freight switching layouts, while others prefer long, continuous passenger routes. Some like layouts with dense foliage and rolling hills, whereas other modelers may prefer flat, desert landscapes. We here at […]
Industrial park railroading has long been an area of interest to model railroaders. This type of railroading serves a concentrated group businesses, and it may or may not be affiliated with a class one railroad. Often the industrial park has its own railroad, or its tracks are served by a local company or nearby short […]
Whether you’re just beginning in the hobby or you’ve been at it for 50 years, almost every model railroader comes across this question: should you use flextrack or sectional track when building your layout? I’ve used both throughout my time in the hobby, and in multiple scales. My first suggestion would be to use both. […]
Modelers have tried many different scenery methods. While each person has their own favorite techniques and preferences, there are several good, time-tested starting points for building scenery. The four most common include the cardboard strip method, the stacked foamboard system, the tape and stuffing option, and the time-honored wire screen and plaster technique. While all […]
A Christmas train adds to the Christmas spirit It’s not often that you hear words like “locomotive” or “uncoupled” in a 3-year-old’s vocabulary, but that’s exactly where my wife and I found ourselves Christmas morning in 2022. Our son Micah had always had a fascination with all trains, so much that we often joked that […]
We’ve all been there before. Seated at the drafting desk, or perhaps the workbench, depending on how your layout room or workshop is set up, notebook open, pen in hand, writing out a list of desired traits for your soon-to-begin model railroad, maybe sketching possible track plans in the margins. A tale as old as […]
