The Model Railroader staff starts work on the Bay Junction HO scale project model train layout. Managing editor David has removed some of the old scenery and fascia. Editor Neil Besougloff and associate editor Cody Grivno keep busy in the workshop with structure projects. […]
The old track has been removed and the new fascia is up on the Bay Junction HO scale project model train layout. Senior editor Jim Hediger shows how he’s making a moveable step so the Model Railroader staff can easily work on the back of the layout and editor Neil Besougloff shows his kitbashing progress […]
Lots of work is taking place on the Model Railroader staff’s Bay Junction model train layout. Associate editor Cody Grivno has installed his United Cooperative grain elevator, while senior editor Dana Kawala describes building the fertilizer plant that will be located in front of the scene. Managing editor David Popp will also show how the […]
Having trouble viewing this video? Please visit our Video FAQ page Associate editor Cody Grivno shows you some of the latest new products to arrive in the Model Railroader offices, including the new Digital Command Control (DCC) sound equipped Paragon2 Baldwin Centipede in HO scale from Broadway Limited Imports. Cody will also demonstrate how […]
Having trouble viewing this video? Please visit our Video FAQ page Pelle Søeborg is a frequent contributor to Model Railroader magazine. Pelle talked with Model Railroader Editor Neil Besougloff about his Daneville & Donner River layout and his new modern-era Union Pacific HO model railroad in this interview from August 26, 2010. You’ll also […]
Having trouble viewing this video? Please visit our Video FAQ page Learn an easy technique for adding ripple and waves effects to the rivers and creeks on your layout. Managing Editor David Popp shows you a river scene that he’s been detailing on the Milwaukee, Racine & Troy. Associate Editor Cody Grivno interviews Bob […]
Having trouble viewing this video? Please visit our Video FAQ page Watch the special 100th episode of Cody’s Office. You’ll see a selection of new model railroading products, including a demonstration of Broadway Limited Imports Paragon2 HO I1sa steam locomotive. This model features Digital Command Control (DCC) and sound. Cody will also show you […]
In this last part of the video series, layout builder Dick Christianson describes the Caliente side of the N scale Salt Lake Route. Dick talks about how photo backdrops helped him with this side of the model railroad. He’ll also give you a tour of some of the fun mini-scenes that he created. […]
Having trouble viewing this video? Please visit our Video FAQ page See new model train products with Model Railroader Associate Editor Cody Grivno. This week you’ll also get tips for installing track feeder wires from Managing Editor David Popp. […]
Layout builder Dick Christianson shows you a couple of ways to install feeder wires with the N scale Kato Unitrack track system. He’ll also show you how he wired the layout’s power bus using terminal strips and you’ll see how he stores the Digitrax Digital Command Control (DCC) command station on this Model Railroader project […]
Learn some of the techniques used to build the desert scenery on the N scale Salt Lake Route. Layout builder Dick Christianson shows you tips for using extruded foam insulation board, rock castings, and more. You’ll also see some prototype photos that Dick used as inspiration for this N scale model railroad. […]
Having trouble viewing this video? Please visit our Video FAQ page Model Railroader Senior Editor Jim Hediger shares a vintage story about a practical joke involving former Associate Editor Gordy Odegard, former Editor and Publisher Russ Larson, and a rather complicated oscilloscope kit. You’ll also see photos of the staff and the Model Railroader […]
