Cody Grivno adds a beachfront to a small area of MR’s Rice Harbor layout. He unintentionally shares not one, not two, not three, but FOUR useful options for creating beach scenery, plus a simple, subtle, yet very effective way to blend the shoreline and the harbor water. […]
Now that the car float, float bridge, and railroad lift bridge are in place on MR’s Rice Harbor layout, Cody Grivno can add the two-part resin to the waterways. But before adding water, Cody first demonstrates how to paint the harbor bottom and prep the area for the pour. […]
With the float bridge now in place on MR’s Rice Harbor layout, David Popp can install the stained stripwood planking over the deck. Follow along as he demonstrates the steps and essential techniques from start to finish. […]
After completing the car float for MR’s Rice Harbor layout, David Popp builds a float bridge used to transfer freight cars from the vessel to the shore. Using prototype photos for reference, David assembled the float bridge from plywood, styrene sheets, foam insulation board, bridge kit components, and various cast parts. […]
MRVP’s David Popp shows how a little bit of paint goes a long way toward adding an authentic, rusty appearance to the MDF hull, styrene deck, and castings of the two-track car float for MR’s 5×9-foot Rice Harbor HO scale layout. […]
In part 3, David Popp adds details and simple castings to the deck of the two-track car float on MR’s 5×9-foot Rice Harbor HO scale layout, all in preparation for the next step – painting the vessel. […]
Work continues on the car float David Popp is assembling for MR’s 5×9-foot Rice Harbor HO scale layout. In part 2, David shows how to align and install the trackwork on the styrene deck. […]
David Popp shows how he designed and shaped the basic hull for a car float on MR’s 5×9-foot Rice Harbor HO scale layout. He also shares an easy technique for adding trackwork to deck of the vessel. […]
Car routing with JMRI OperationsPro | The crew continues to prepare the State Line Route N scale model railroad for a prototypical operating session, and the next step is car routing. Instead of the widely used car-card-and-waybill freight-car routing system, David Popp and Trains.com host Gerry Leone use a computer program called JMRI OperationsPro to […]
In this episode, Host Gerry Leone acknowledges two areas on his layout where he needs to rethink the track arrangements. He discusses possible solutions and then shows how he rerouted the track on the lower and upper decks to fit his vision. Getting to know Gerry Leone Back on Track host Gerry Leone is just […]
With the HO scale Virginian Ry. benchwork in the Model Railroader workshop, managing editor David Popp begins laying down track and cork roadbed. He describes some of the changes that he had to make to the track arrangement for this model train layout. You’ll also learn how David saved space on the Virginian by using […]
[…]
