Name: North Montana Line Layout designer: Dan Lewis Scale: N (1:160) Size: 18 x 24 feet Prototype: Milwaukee Road Locale: central Montana Era: 1953-54 Style: walk-in Mainline run: 115 feet Minimum radius: 121⁄2″ Minimum turnout: no. 6 (main), no. 4 (industrial spurs) Maximum grade: 2.2 percent Originally appeared in the September 2011 issue of Model […]
Read More…
For railroad builders in North America, a 2.2 percent climb was considered the standard maximum grade for a well-engineered mountain railroad. But why this number? And how did its adoption become so widespread? Using modern-day analysis of some famous mountain railroad grades, Trains Magazine’s September 2011 issue explores the origins and adoption of 2.2 percent […]
Read More…
Having trouble viewing this video? Please visit our Video FAQ page […]
Read More…
Having trouble viewing this video? Please visit our Video FAQ page In this MRVP exclusive mini-series, Gerry Leone walks you through the basic steps you can use to capture great shots of your model railroad…and you don’t even need an expensive camera to get impressive results! […]
Read More…
ExactRail HO scale depressed-center flatcar This modern depressed-center flatcar is a recent release from ExactRail that follows the overall lines of prototype cars built by General Steel Industries (GSI) in the 1970s and 1980s. The prototypes featured one-piece, cast-steel underframes that could carry tall loads because the carbody deck is only 23″ above the rails. […]
Read More…
Kato N scale General Electric U30C diesel locomotive It’s been 20 years since Kato last offered an N scale model of General Electric’s six-axle U30C hood units, and it’s been worth the wait. The new model, retooled under the hood to make it friendlier to Digital Command Control, is a sharp-looking and smooth-performing engine. Keep […]
Read More…
MTH HO scale train set Many model railroaders get started in the hobby with a train set. A loop of track, power pack, a locomotive, and rolling stock will have a new model railroader running trains in a matter of minutes. MTH has taken its ready-to-run sets a step further by including its Digital Command […]
Read More…
Walthers HO scale Meadowhead barn kit Price: $38.98 ManufacturerWm. K. Walthers Inc.P.O. Box 3039Milwaukee, WI 53201www.walthers.com Era: 1900 to present Comments: If you’re looking for a structure that you can assemble, paint, and weather in one evening, then you’ll want to check out the Walthers HO scale Meadowhead barn kit. The injection-molded plastic kit has […]
Read More…
Having trouble viewing this video? Please visit our Video FAQ page Associate editor Cody Grivno weathered this Proto 2000 from Walthers 0-8-0 steam locomotive for the Model Railroader Virginian Ry. HO scale project layout. Cody will show you some of his favorite techniques. You’ll also see some new model railroading products, including a demonstration […]
Read More…
HO scale locomotives Electro-Motive Division GP7 and GP9 diesel locomotives. New paint scheme on GP7 is Atchison, Topeka & Santa Fe (zebra stripes). New scheme on GP9 is New York Central (two-tone gray). Separately applied details, wire grab irons, and plastic handrails. Both road names offered with and without steam generators. Direct-current models with Quick […]
Read More…
We tested the Athearn Trains N scale EMD F59PHI diesel locomotive on our Salt Lake Route model train layout. Equipped with a SoundTraxx Tsunami Digital Command Control (DCC) sound decoder, the locomotive looked and sounded great hauling a set of Athearn N scale Bombardier bi-level commuter cars. […]
Read More…
1950: Dieselization – Ten Class 1 railroads had already dieselized before this year, including the Atlanta & St. Andrews Bay; Chicago, Indianapolis & Louisville (Monon); Columbus & Greenville; Detroit & Mackinac; Elgin, Joliet & Eastern; Gulf, Mobile & Ohio; Lehigh & New England; New York, Ontario & Western; New York, Susquehanna & Western; and Texas-Mexican. […]
Read More…