Having trouble viewing this video? Please visit our Video FAQ page David has the plexiglas water installed in the Kamloops Lake scene of our Canadian Canyons N scale project layout. Now Eric White can begin installing the stone wall along the waterfront. Follow along as he shows how to prep, paint, and then place […]
Having trouble viewing this video? Please visit our Video FAQ page New diesel locomotives in N and O scale highlight the new model railroading products featured in this month’s episode of Cody’s Office. Model Railroader associate editor Cody Grivno will also give you tips for modeling a “patched out” diesel locomotive. This month’s viewer […]
Having trouble viewing this video? Please visit our Video FAQ page Don’t have an airbrush? Maybe you don’t need one? Host Cody Grivno shares his techniques for making a cylindrical hopper look good n’ grimy – all without using an airbrush! Follow along as he shares how to work with weathering powders and brushed-on paint […]
Having trouble viewing this video? Please visit our Video FAQ page This time on Off The Rails, host Gerry Leone has fun with foam! Not the type of foam insulation board typically used in model railroad scenery. Instead, Gerry keeps his focus on open-cell and closed-cell foam commonly used as model railroad product packaging. […]
Having trouble viewing this video? Please visit our Video FAQ page Dana Kawala, senior editor for Model Railroader magazine, gets his hands on a PIKO SmartControl Basic Set. Watch this video to see how Dana uses the Pro SmartController to program and operate DCC-equipped locomotives on the WSOR section of the MR&T HO scale layout. […]
Having trouble viewing this video? Please visit our Video FAQ page Eric White, associate editor for Model Railroader magazine, introduces you to the Walthers Layout Control System switch machine. In this instructional video, Eric reveals all the supplied parts, helpful tools, and the step-by-step installation and programming processes needed to add the switch machine […]
Having trouble viewing this video? Please visit our Video FAQ page David’s scratchbuilt sawmill needed a roof. So in this episode of his Olympia Logging Co. On30 layout expansion blog, he’ll share how to model a tin roof using corrugated styrene sheet. Watch and learn how to measure, cut, install, paint, and weather the […]
Having trouble viewing this video? Please visit our Video FAQ page David is back for a new epsiode of Ask MRVP! This month he addresses your inquires related to trackwork, wiring, layout maintenance, DCC programming, weathering your models, and more. Watch, learn, enjoy, and then post your own question for the next episode! […]
Having trouble viewing this video? Please visit our Video FAQ page Work on the Canadian Canyons scenery keeps rolling forward. An all-star trio (David, Eric, and Kent) takes on the task of modeling the seldom viewed right-of-way along Kamloops Lake, complete with stone arch viaducts, red rock cliffs, and murky lake water. See how […]
Having trouble viewing this video? Please visit our Video FAQ page The hardened resin water David added (Part 1) to our Canadian Canyons N scale layout is now ready for additional details. In this episode, David demonstrates how to use Woodland Scenics Surface Water – Water Waves product to model the swirling flow of […]
Having trouble viewing this video? Please visit our Video FAQ page David dives into construction of a scratchbuilt sawmill for his Olympia Logging Co. On30 layout expansion. He shares insights gathered from researching the Phillips Bros. steam-powered mill built 1933 in Oak Run, California (https://youtu.be/zAvurSjBVW8). David then shows how he used this knowledge to […]
Having trouble viewing this video? Please visit our Video FAQ page Now that the surrounding Fraser River Canyon scenery is done, David can finally add realistic river water! In this episode of the Canadian Canyons Series, you’ll see just what it takes to prep the plywood layout surface, and then mix and apply the […]
