Trains News Wire now lives under a new site section called TrainsPRO. To learn more, click here.
Having trouble viewing this video? Please visit our Video FAQ page In our second foam scenery installment, David shows how he built a variety of hills by stacking strips of foam insulation board. He also covers some basic shaping and finishing techniques in this video. […]
In part 2 of Drew’s trip to Chicago, he visits two towers along Metra’s former Milwaukee Road lines – A5 and A2. In this video, Drew gives you a close-up look inside the towers, and you get to meet the people who run these busy railroad junction points. […]
Having trouble viewing this video? Please visit our Video FAQ page In the 1970s, then editor Linn Westcott asked young associate editor Jim Hediger to build an HO model of the Auto-Train for the cover of the December 1974 issue of MR – all 38 cars of it! Jim shares the models he built […]
Having trouble viewing this video? Please visit our Video FAQ page In the 1970s, then editor Linn Westcott asked young associate editor Jim Hediger to build an HO model of the Auto-Train for the cover of the December 1974 issue of MR – all 38 cars of it! Jim shares the models he built […]
Three layouts are a lot to fit into one article! Enjoy the additional photos of Becky Chestney’s three Christmas layouts in this video slideshow; visit the 7 x 15-foot O gauge Disneyland layout, the 4 x 5-foot prewar layout dominated by Standard gauge, and the 4 x 6-foot “Postwar Central” that features both O and […]
David Smith’s 4 x 6-foot O gauge holiday display uses a pie-shaped platform to run his toy trains under a full-size Christmas tree. Learn how to build this attractive and compact display bursting with holiday cheer in the December issue. […]
Drop-in decoders make installing DCC in N scale locomotives about as easy as it gets. In this video David shows you how to install a TCS K4D6 decoder and K4LK lighting module in an N scale Kato MP36PH diesel locomotive. […]
Drop-in decoders make installing DCC in N scale locomotives about as easy as it gets. In this video David shows you how to install a TCS K4D6 decoder and K4LK lighting module in an N scale Kato MP36PH diesel locomotive. […]
Having trouble viewing this video? Please visit our Video FAQ page Just in time for Halloween, Cody shows you two ways to strip paint from models in his latest visit to the “MR Laboratory.” He also shares some scary tips for preparing resin models, cutting coupler trip pins, and painting locomotive numberboards. And watchout […]
Having trouble viewing this video? Please visit our Video FAQ page Just in time for Halloween, Cody shows you two ways to strip paint from models in his latest visit to the “MR Laboratory.” He also shares some scary tips for preparing resin models, cutting coupler trip pins, and painting locomotive numberboards. And watchout […]
The Model Railroader staff’s Rice Harbor layout is finally complete. Get a behind-the-scenes look at a magazine photo shoot of the harbor railroad with editor Neil Besougloff and MR photographer Bill Zuback. Senior editor Dana Kawala will also show you some of the rolling stock used on our Seaboard Shore Line model railroad. Thanks for watching! […]
With most of the structures and ground cover in place, all that’s left to do is finish up the waterfront on Rice Harbor. Associate editor Cody Grivno describes some of the painting techniques that he used to add depth to the harbor bottom. He’ll also talk about some of the other scenic details around the […]
