The HO scale Rice Harbor project continues after the two-part resin water has set. MR’s Cody Grivno shows how to add wave effects by brushing on Gloss gel with a paintbrush. In this video, Cody demonstrates the various brush techniques he used to create realistic results. […]
The HO scale Rice Harbor layout is now properly prepared for an application of two-part resin used to simulate water in the harbor. In this video, MR’s Cody Grivno demonstrates the steps for mixing, tinting, and pouring resin – without making a mess of the surrounding scenery. […]
Cody Grivno adds a beachfront to a small area of MR’s Rice Harbor layout. He unintentionally shares not one, not two, not three, but FOUR useful options for creating beach scenery, plus a simple, subtle, yet very effective way to blend the shoreline and the harbor water. […]
Now that the car float, float bridge, and railroad lift bridge are in place on MR’s Rice Harbor layout, Cody Grivno can add the two-part resin to the waterways. But before adding water, Cody first demonstrates how to paint the harbor bottom and prep the area for the pour. […]
With the float bridge now in place on MR’s Rice Harbor layout, David Popp can install the stained stripwood planking over the deck. Follow along as he demonstrates the steps and essential techniques from start to finish. […]
After completing the car float for MR’s Rice Harbor layout, David Popp builds a float bridge used to transfer freight cars from the vessel to the shore. Using prototype photos for reference, David assembled the float bridge from plywood, styrene sheets, foam insulation board, bridge kit components, and various cast parts. […]
MRVP’s David Popp shows how a little bit of paint goes a long way toward adding an authentic, rusty appearance to the MDF hull, styrene deck, and castings of the two-track car float for MR’s 5×9-foot Rice Harbor HO scale layout. […]
In part 3, David Popp adds details and simple castings to the deck of the two-track car float on MR’s 5×9-foot Rice Harbor HO scale layout, all in preparation for the next step – painting the vessel. […]
Work continues on the car float David Popp is assembling for MR’s 5×9-foot Rice Harbor HO scale layout. In part 2, David shows how to align and install the trackwork on the styrene deck. […]
David Popp shows how he designed and shaped the basic hull for a car float on MR’s 5×9-foot Rice Harbor HO scale layout. He also shares an easy technique for adding trackwork to deck of the vessel. […]
How to disassemble a locomotive without damaging it and then reassembling it is one of the more advanced tasks of a model railroader. Some people just want to see the inside of the locomotive, while more often, there’s a circuit board that needs repair or replacement, gears that need lubricating, or a faulty wire or […]
Add some flair to your layout with the Broadway Limited Imports HO SD45. The six-axle road locomotive, based on an Electro-Motive Division (EMD) prototype, is offered in both high and low short hood versions in eight paint schemes. The Broadway Limited Imports HO scale SD45 has an injection-molded plastic body, a die-cast metal frame, all-wheel […]
