Introducing the all-new Trains.com Forum! Become a part of our Community! >>VISIT NOW
Lots of work is taking place on the Model Railroader staff’s Bay Junction model train layout. Associate editor Cody Grivno has installed his United Cooperative grain elevator, while senior editor Dana Kawala describes building the fertilizer plant that will be located in front of the scene. Managing editor David Popp will also show how the […]
Bay Junction was a project railroad for the editors of Model Railroaders in the early 2010s. Track plans and videos for that project are linked to below. Bay Junction track plans The Bay Junction track plan Industries and tracks and Williams Bay Bay Junction overview article Read the first article about the second Milwaukee, […]
Beginning in the January 2011 issue you’ll see the latest Model Railroader project layout, the HO scale Bay Junction on the Milwaukee, Racine & Troy. We built this modern junction town as part of our MR&T club layout, but we’ll show you how you can build the railroad as a standalone island or shelf layout. […]
Don’t miss the last episode of our Building Bay Junction video journal. The editors wrap up the series by describing the various finished structures and scenes on the Model Railroader HO scale Bay Junction model train layout. Be sure to post your comments below, and thank you for watching! […]
Model Railroader executive editor Andy Sperandeo finishes up the corn syrup transloading terminal in Williams Bay. He’s adding a Walthers HO scale chain link fence. Associate editor Cody Grivno is in the workshop detailing diesel locomotives for the Milwaukee, Racine & Troy. You’ll also see associate editors Steve Otte and Kent Johnson working on other […]
In this episode Model Railroader executive editor Andy Sperandeo discusses the prototypical arrangement of the signals in Bay Junction. He’ll also show you some of the trackside details that he added to some of the turnouts on our HO scale model train layout. Managing editor David Popp then gives an overview of a typical day […]
Some areas of the Model Railroader staff’s Bay Junction model train layout have been declared finished, but there are still a few places that need some finishing touches. Associate editor Cody Grivno is working on some loose ends in between the rails of the track, while senior editor Dana Kawala finishes up the fertilizer plant […]
The town of Williams Bay takes shape on the HO scale Bay Junction project. Model Railroader associate editor Steve Otte shows some of the scratchbuilt interior buildings that he made for a block of structures from a Walthers Merchant’s Row kit. On the opposite end of the layout, executive editor Andy Sperandeo installed a kitbashed […]
Editor Neil Besougloff declares one end of the Model Railroader staff’s Bay Junction project model train layout complete. On the other end of the layout, Neil and managing editor David Popp continue to rejuvenate scenery with additional ground cover. David has also installed and painted rock castings for the riverbed. […]
Lots of progress has been made on the Model Railroader staff’s HO scale Bay Junction project layout. Associate editor Cody Grivno is working on ballasting track, including the interchange yard. Editor Neil Besougloff shows you how he painted the parking lot for his station. Associate editor Steve Otte describes his method for paving the streets […]
The wiring is just about finished on the Bay Junction project layout. Managing editor David Popp shows you how to power turnout frogs. On this model railroad we’re using Peco track and turnouts and running trains with Digital Command Control (DCC). David has also installed a Tam Valley Depot Hex Frog Juicer and will describe […]
Model Railroader senior editor Jim Hediger finished Kelly Appliance Co. and installed the structure on the Bay Junction layout. Managing editor David Popp and Editor Neil Besougloff work on the scenery base. On the other side of the Milwaukee, Racine & Troy, associate editor Cody Grivno is working on another scene, a feed mill that […]
